Features

Smart intelligent control.
Lower energy consumption, higher production.
High safety protection, protect personal safe and equipment safe.

Working Principle

• Feeding 1 is automatic according to customer requirements.
• Unit 2 the material is cut, mixed, heated, dried, degassed, densified and buffered.
• Next, the tangentially connected extruder is fi lled continuously with hot, pre-compacted material. In the extruder screw 3 the material is plasticised, homogenised and then cleaned in the fully automatic self-cleaning filter 4.
• The prepared and cleaned melt then goes via the melt pump 5 directly to the co-rotating, self-cleaning twin-screw extruder 6. With its excellent mixing and gas removal properties, this flexible part of the system can handle all compounding tasks.
• Besides the dosing of a wide variety of additives, high amounts of fillers and reinforcing agents 7 can be admixed. In the degassing zone 8 the compounded melt is degassed and moves to the respective tool 9 (e.g. POLYTEC hot die face pelletising system)

Technical Characteristics

Mode	Output capacity in kg/h*	Remark
PTC100-65	300	Examples of additives, fillers and reinforcing agents suitable for admixing
PTC130-75	500
PTC185-95	800-1000

Depending on material properties of the polymer (moisture content, print, degree of contamination, etc.) type and properties of the filling/reinforcing agent and the degree of filling.