-
Vacuum Forming (Blister)
A plastic processing technology. The main principle is to heat and soften a flat hard plastic sheet, then vacuum it to the surface of the mold, and then cool it into shape. Vacuum Forming, often called blister, is a plastic processing technology. The main principle is to heat a flat hard plastic sheet to soften
-
Closed plastic mixing machine
The closed plastic mixing machine is referred to as the internal mixer. The main component of the internal mixer is the internal mixing chamber, also called the plasticizing chamber. The upper part is the feeding device and the lower part is the unloading device port. There is a bolt on the upper and lower parts;
-
Construction Plastics
Construction plastics refer to the general term for plastic products used in construction projects. Commonly used molding methods for manufacturing construction plastic products include: calendering, extrusion, injection, molding, coating, lamination, etc. Plastic is a material that uses synthetic polymer compounds or natural polymer compounds as the main base material. It is mixed with other raw
-
Plastic Particles
Plastic particles refer to granular plastics, generally divided into more than 200 types and subdivided into thousands of types. Common plastic particles include general plastics, engineering plastics, and special plastics. General plastics : polypropylene, polyethylene, polyvinyl chloride, polystyrene, polyester, polyurethane, etc. Engineering plastics: nylon, polytetrafluoroethylene, polyformaldehyde, polycarbonate silicone, etc. Special plastics : thermosetting plastics, functional
-
Recycled Plastic
Recycled plastic is the reuse of plastics. After crushing with mechanical blades, the reuse of plastics is completed. Product introduction Recycled plastics refer to plastic raw materials obtained by processing waste plastics through physical or chemical methods such as pretreatment, melt granulation, modification, etc. It is the reuse of plastics. Uses Plastic has good processing
-
Waste Plastic
Waste plastic is a popular term that does not refer to waste, old and useless plastic products. The properties of most plastic products, especially those that are disposable in large quantities, do not change significantly after use. Therefore, they can be recycled and reprocessed into plastic products using appropriate methods for reuse. Basic introduction The
- Home
- About Wanplas
- Products
- Compounding Extruder
- Extrusion Blow Molding Machine
- Plastic Extrusion Machine
- Plastic Recycling Machine
- PET Bottle Blow Machine
- Filling Machine
- Injection Molding Machine
- Injection Blow Molding Machine
- Thermoforming Machine
- Auxiliary Equipment
- Laboratory Equipment
- Solutions
- Industries
- News
- Contact
