-
PET Flakes Pelletizing Line
Our twin screw extruder is designed for PET flake recycling and outputs 50-1000kg per hour. We have full experience in PET flake extruder from screw design, vacuum design and temperature controller which can make sure your pellets with high IV and transparent. When will you need our PET flake twin screw extruder? If you want
-
PP/PE Recycling and Compounding Line
Features Smart intelligent control.Lower energy consumption, higher production.High safety protection, protect personal safe and equipment safe. Working Principle Technical Characteristics Mode Output capacity in kg/h* Remark PTC100-65 300 Examples of additives, fillers and reinforcing agents suitable for admixing PTC130-75 500 PTC185-95 800-1000 Depending on material properties of the polymer (moisture content, print, degree of
-
Air Compressor
Screw Air Compressor Full-automatically load and unload control the input air full automatically. Compressor will start automatically when there is no pressure, and will stop working when the pressure is full in air tank. When the compressor is short of electricity, the electricity will be in reverse. When the pressure is too high, the temperature
-
Cooling Chiller
Main technical parameter (Air cooled) Model 8P 10P 12P 15P 20P Cooling capacity 19.9 Kw17157 Kcal/h 24.95 Kw21457 Kcal/h 28.5 Kw24570 Kcal/h 38.08 Kw32749 Kcal/h 49.55 Kw42613 Kcal/h Compressor input power 7.14 Kw 8.9 Kw 10.4 Kw 13.5 Kw 9*2 Kw Evaporator Water tank with coil, Shell and tube heat exchange1.5’’ pipe Water tank with coil,
-
High-Speed Mixer
As the core part of the compounding and masterbatch production process, the high-speed mixer is for premixing all raw materials, Our mixer volume from 5L to 2000L, high-speed mixer, and hot-cold double-stage mixer. High-Speed Mixer Parameters Model SHR-5A SHR-50A SHR-100A SHR-200A SHR-300A SHR-500A SHR-800A SHR-1000A Total Volume 5L 50L 100L 200L 300L 500L 800L 1000L
-
Gravimetric Feeder (Loss In Weight Feeder)
A gravimetric feeder, also known as a loss-in-weight feeder, is a self-calibrating dosing system that doses based on weight in speed. A volumetric feeder, on the other hand, does this based on volume in speed. In gravimetric dosing, the weight of the dosed additive is measured using a load cell that is the foundation of
- Home
- About Wanplas
- Products
- Compounding Extruder
- Extrusion Blow Molding Machine
- Plastic Extrusion Machine
- Plastic Recycling Machine
- PET Bottle Blow Machine
- Filling Machine
- Injection Molding Machine
- Injection Blow Molding Machine
- Thermoforming Machine
- Auxiliary Equipment
- Laboratory Equipment
- Solutions
- Industries
- News
- Contact
