It is suitable for testing the variation of shear modulus when raw rubber is vulcanized. The shear modulus is proportional to the crosslink density. So the results reflect the changes in the degree of cross link during vulcanization. So that we can measure the parameters like curing speed, curing time and sulfur regeneration.

Applicable Standards

• GB/T16584 Rubber–Determination of vulcanization characteristics using a rotorless vulcanizer.
• ISO6502 Vulcanizer standard information.
• ASTMD5289 Test methods for rubber properties.

Technical parameters

Temp. Range	RT-200℃
Temp. Accuracy	≤+0.3℃
Heating Rate	Room temperature RT-150℃<20min
Temp. Resolution	0.01℃
Torque Range	0-20N.m
Torque Resolution	0.001N.m
Cavity Frequecy	1.7Hz
Amplitude	±0.5°, ±1°, +3°
Environment Temp.	0-35℃
Working Humidity	<80%
Vulcanization time setting range	1-300min
Air Source	0.4-0.6MPa
Power Supply	AC 220V±10%, 50/60Hz, 800W
Dimension	660*580*1300mm
N.W.	260Kg