A small business entering PET recycling is not buying a crusher. It is buying a chain of nineteen steps that turns a dirty bale of bottles into clean flake a fiber or bottle producer will accept, plus the installation and training that make the chain run on day one. This guide follows that whole decision: what the plant produces, how the stages connect, what the official machine platform really specifies, what a turnkey package should include, and how the numbers work in US dollars. It is written for an owner operator who needs a bankable plan rather than a brochure.
1. What a Small Business PET Recycling Plant Delivers
The product is flake, not bottles
The output of this plant is cleaned PET flake, typically around 12 millimeters, sold to fiber producers, sheet extruders or bottle to bottle recyclers. The value is not in the size reduction but in the purity. A bale that arrives with labels, caps, glue, sand and a percentage of PVC bottles leaves the line as a controlled material with moisture below one percent and total impurities counted in parts per million. That transformation is what a buyer pays for, and it is why downstream process stages deserve more attention than the crusher.
Who a small plant serves
A small business usually starts with local collection: deposit bottles, curbside material, or the outflow from a bottling partner. The plant is sized to a secure supply rather than to a national market. In practice that means a compact plant running one or two shifts, with the owner involved in both procurement and sales. The equipment must be forgiving of variable input, quick to clean when the feed changes, and simple enough that a small team can operate it without a large engineering department.
It helps to be clear about scale. The official Wanplas PET crushing and washing platform begins at 1000 kilograms per hour of input. Many first plants run a scaled configuration below that figure, built from the same station sequence but with smaller conveyors, wash tanks and dryers. This guide uses the official 1000 kilogram tier as the baseline for utilities and consumption, and clearly labels any smaller figure as a project estimate rather than a published rating.
2. Why a Turnkey Package Fits a First Time Investor
One responsible party
A turnkey plant means one supplier is accountable for the layout, the machines, the interconnections, the installation, the startup and the training. Buying station by station from different vendors is tempting because each quote looks cheaper, but the interfaces then become the buyer’s problem. A conveyor that is too short, a pump that does not match the tank, or a control panel that cannot talk to the upstream machine will each cost time and money after delivery. With a turnkey contract there is one name to call when the line does not reach its output.
What the package must contain
A complete package covers equipment supply, freight, foundations and steelwork, electrical and piping installation, water and steam connections, no load testing, trial runs with the customer’s bottles, operator training, spare parts and a performance guarantee. It should also include a plant layout drawing showing clearances for maintenance and a utility schedule stating exactly what the building must provide. If any of these are missing, the investor is quietly taking on work that was assumed to be included.
Training belongs inside the price, not as an afterthought. A washing line has many adjustments that are learned only by running material: chemical dose, residence time, water flow, dewatering pressure and drying temperature. A supplier who spends a week with the crew and leaves written settings for the first grades will shorten the learning curve by months.
3. Feedstock, Bale Quality and Yield
Know what is in the bale
Input quality sets the ceiling on output quality. A bale of well sorted deposit bottles might yield 88 to 92 percent saleable flake. A mixed municipal bale with significant PVC, paper and food residue can fall below 70 percent, and the lost fraction still consumes water, energy and labor. Before buying a line, a business should sample its real feedstock over several weeks and record bottle type, label construction, cap material, contamination and moisture.
Contaminants that cause rejected flake
PVC bottles are the most dangerous contaminant because even a small amount forms dark specks when PET is reprocessed. Color sorted feed protects the value of clear flake. Paper labels and glue drive up chemical use and can leave residue that shows in the finished fiber. Metal, glass and stones damage the crusher and the friction washer. A plant that invests in better front end sorting often gains more yield than one that buys a larger wash tank.
Contracting for supply
A small plant should secure feedstock with written agreements that specify the material, the contamination limit and the delivery format. Bale density affects unloading and storage: a dense bale may weigh 500 to 700 kilograms and needs a forklift and a designated breakdown area. The storage area should hold at least a week of production, because a line that stops for lack of bottles is far more expensive than a line that stops for a mechanical fault.
4. The Complete PET Bottle Process Flow
The official Wanplas process for food grade and filament grade bottle recycling runs through a defined sequence. Each step removes a specific contaminant, and skipping one usually moves the problem downstream where it is harder to fix.
The sequence is: de-baling, metal removal, label removal, a second metal removal, bottle pre-washing, optical bottle sorting, manual sorting, crushing, dust removal, flotation hot washing, friction washing, rinsing, flushing washing, drying, dust removal, optical flakes sorting, blending, online inspection and packing. The line configuration is optimized for the raw material, so a plant processing only clear deposit bottles can simplify some stations while a mixed feedstock needs the full train.
Why the order matters
Labels are removed before crushing because whole bottles are easier to separate from loose film. Metal removal appears twice because magnetic and non magnetic contaminants behave differently and new pieces are exposed after labels are stripped. Optical sorting happens once on whole bottles and again on flake, because a wrong color bottle is easy to see before grinding but a small PVC fragment is only detected after it becomes a chip. A buyer should read the flow as a set of checkpoints, not as a list of machines to price.
5. Plant Configurations and Equipment Price List
The table gives a representative budget for a compact turnkey plant sized near the official entry tier. Amounts are in US dollars and cover the equipment and its installation. Building work, land and working capital are separate.
| Station | Scope | Price in US dollars |
|---|---|---|
| De-baling and feeding | Bale opener, belt conveyor, metering hopper | 28,000 to 65,000 |
| Metal separation | Magnetic and eddy current units, two passes | 22,000 to 58,000 |
| Label removal | Label stripper and zig zag air classifier | 35,000 to 90,000 |
| Optical bottle sorting | Color and polymer recognition with air ejection | 120,000 to 320,000 |
| Crushing and dust removal | Wet crusher, screens, dust separator | 85,000 to 190,000 |
| Flotation and hot wash | Float tank, hot washer, chemical dosing, steam system | 140,000 to 340,000 |
| Friction and rinsing | High speed friction washer, rinse and flushing tanks | 70,000 to 165,000 |
| Dewatering and drying | Centrifugal dewaterer and pipe dryer with 50 square meter exchange area | 95,000 to 210,000 |
| Flakes sorting and packing | Optical flake sorter, vibrating silo of 1.5 cubic meter, weighing | 90,000 to 230,000 |
| Control and utilities | Control system, water reuse, compressors, piping and wiring | 110,000 to 260,000 |
| Installation and training | Erection, startup, one week of training, first grade support | 70,000 to 160,000 |
| Total compact plant | Full line installed and trained | 865,000 to 2,088,000 |
A plant that adds food grade certification, a second optical sort and a fully automated bale handling system moves to the upper part of that band or beyond it. A plant that processes only clear deposit bottles and sells into fiber can sit near the lower end. The buyer should decide the target customer before choosing the configuration, because the difference is mostly in sorting rather than washing.
6. De-baling, Metal Removal and Label Removal
Opening the bale safely
Bales arrive compressed and wire bound. The de-baling station cuts the straps, loosens the material and feeds bottles onto a belt at a controlled rate. Overfeeding is the most common startup fault: a surge of bottles jams the label stripper and starves the downstream wash at the same time. A metering hopper and a variable speed belt are worth their cost because they turn a lumpy delivery into a steady stream. The operator should be trained to spread a bale across several hours rather than dumping it in twenty minutes.
Two metal removal passes
The first magnetic pass takes steel cans and large ferrous pieces before they reach the crusher. After labels are stripped, a second pass catches smaller fragments that were hidden inside the bale. Eddy current separation removes aluminum, which is common in mixed beverage streams. Each pass protects the crusher screen and reduces the risk of a spark in a dusty area. The units are modest in price but expensive to omit, since a single tramp metal item can stop the line for a shift.
Label stripping and air classification
Labels are removed while bottles are still whole. A label stripper opens the bottle surface and a zig zag air classifier lifts the light film away while the heavier bottles fall. The official line uses a zig zag label blower for this step. Good separation here reduces the chemical load in the hot wash and keeps paper fibers out of the rinse water. If the feed contains shrink sleeves that do not detach easily, the supplier should know before the order is placed because that grade may need an extra pre-treatment step.
7. Pre-washing and Optical Bottle Sorting
Pre-wash purpose
Pre-washing removes loose dirt and sugar residue before bottles are ground. It is a short, high volume step using recovered water, not a full wash. Its job is to protect the crusher and to reduce the dirt load entering the main washing circuit. A pre-wash that uses clean water is wasteful; one that uses filtered process water keeps consumption low and is easier to justify to a local regulator.
Optical sorting of whole bottles
An optical sorter recognizes color and polymer type and ejects the wrong bottles with a short air burst. Clear PET is the most valuable stream, so the system is usually set to reject colored bottles, PVC and non PET containers. Modern units can also flag opaque or heavily labeled bottles. The official flow places optical sorting after pre-washing and before manual sorting, because a clean bottle is easier to read and a human picker should only handle what the machine could not decide.
The human checkpoint
Manual sorting still earns its place on a small line. A picker can remove a crushed bottle with a strange shape or a label that hides the polymer, cases a sensor may miss. This station is also a useful training ground: the person watching the belt learns what the feedstock really contains and can alert the owner when a supplier starts sending poorer material. A few minutes of manual inspection per hour is cheaper than a batch of contaminated flake.
8. Crushing, Dust Removal and Flotation
Wet crushing and screen size
The crusher reduces bottles to flake near 12 millimeters, the size given in the official product data. Wet crushing keeps dust down and helps separate labels from PET by density. The screen size matters: flake that is too fine is lost in the wash water and creates sludge, while oversized pieces fail to clean properly. A regular screen inspection is part of daily maintenance, because a worn screen quietly shifts the size distribution and lowers yield.
Dust removal before the wash
A dust separator removes paper fibers and fine dirt after grinding. This step protects the hot wash from an unnecessary solids load and makes the water circuit easier to manage. The dust collected is not saleable and must be disposed of responsibly, so the plant should have a defined waste stream and a record of where it goes.
Flotation and cap separation
The floating washer separates polypropylene and polyethylene caps from PET because the cap polymers float while PET sinks. The official line lists a floating washer specifically for cap removal. Good float design uses gentle agitation and enough residence time for a clean split; a rushed tank sends caps into the hot wash where they become a contaminant that is harder to remove. Operators learn to judge the split by watching the surface layer, and that judgement is one of the first things to teach during training.
9. Hot Washing and Chemical Dosing
What the hot washer removes
Hot washing removes glue, labels residue and organic films that water alone cannot shift. The official hot washer is described as having smart control of the washing process, chemical dosing, flake feed and discharge, steam injection and heating time. That level of control matters because a weak wash leaves glue on the flake while an overly aggressive wash attacks the PET surface and adds cost. The target is a clean surface with the least chemical and steam use.
Chemical and steam balance
The official consumption table gives about 12 kilograms of washing detergent per ton of flake and between 450 and 600 kilograms of steam per ton depending on plant size. The larger plant uses less per ton because heat is recovered more effectively. Caustic based detergents are common, but the exact package depends on the label adhesive in the feedstock. A supplier who runs a trial with the customer’s actual bottles and records the dose will save the buyer months of trial and error.
Residence time and temperature
Flake must stay in the hot wash long enough for the chemistry to work. Too short a residence sends glue downstream; too long wastes steam and can reduce throughput. Temperature is usually held in a warm alkaline range rather than at boiling, and the wash tank should be covered to limit heat loss. A simple record of temperature, dose and residence time for each shift turns a mysterious quality drift into a solvable problem.
10. Friction Washing, Rinsing and Dewatering
High speed friction washing
After the hot wash, flake enters a high speed friction washer where intense agitation rubs softened glue from the surface. The machine is mechanical rather than chemical, which is why it reduces the load on the rinse circuit. Wear is concentrated in the rotor and screen, so a small plant should buy the first spare set with the line. A worn friction washer looks fine from the outside but quietly leaves residue that shows up in the customer’s fiber.
Rinsing and flushing
Rinsing removes detergent, and flushing gives the flake a final clean water contact. The official flow treats these as separate steps, and the separation is deliberate: a single rinse that tries to do both jobs uses more water and still leaves residue. Counter current flow, where the cleanest water meets the cleanest flake, stretches every cubic meter further. This is especially important in regions where water discharge is restricted.
Dewatering to one percent
The dewatering unit removes dirty water and delivers flake at about one percent moisture, the level stated in the official product data before pipe drying. Mechanical dewatering is far cheaper than thermal drying, so pushing the machine to its best performance pays directly in energy. Operators should check the discharge moisture daily with a simple weigh and dry test, because a small rise here raises steam use all the way down the line.
11. Drying, Flakes Sorting and Packing
Pipe drying
The official pipe dryer uses heat exchange across a 50 square meter area to bring flake to the final moisture target. Unlike a rotating drum, a pipe dryer moves flake through a controlled hot air path with gentle handling, which limits fines generation. Air temperature and flow are balanced against residence time: too hot and the flake can discolor, too cool and moisture stays above the one percent limit. The dryer is the last place to fix mistakes made upstream, so a plant that arrives here with wet flake is already losing money.
Optical sorting of flake
A second optical pass examines the flake itself. This is where small PVC chips and off color particles are found, because they are far easier to detect as individual pieces than as fragments hidden in a whole bottle. Rejecting them here is the difference between flake that sells into fiber and flake that is downgraded. The sorter should be calibrated with samples from the plant’s own feedstock rather than with generic test pieces.
Blending, inspection and packing
Blending evens out the small variations between batches, and online inspection provides a final check before packing. The official line includes a vibrating packing silo of 1.5 cubic meters with hydraulic lifters. Packing into bulk bags or 25 kilogram sacks depends on the customer. A small plant often starts with sacks because they are flexible and easy to store, then moves to bulk bags when a single customer takes most of the output.
12. Flake Quality Targets and Testing
The official product data gives clear limits for food grade and filament grade output. These are useful as a commissioning checklist even for a plant selling into fiber, because they define what a well run line can achieve.
| Parameter | Official target | Why it matters |
|---|---|---|
| Moisture | Below 1 percent | Protects downstream melt processing |
| Label residue | Below 15 ppm | Prevents specks and odor |
| PVC content | Below 30 ppm | Avoids black specks on reprocessing |
| Inorganic compounds | Below 10 ppm | Indicates sand and glass removal |
| Glue | Below 10 ppm | Shows hot wash effectiveness |
| pH value | 7.5 plus or minus 0.5 | Confirms rinsing is complete |
| PP and PE | Below 15 ppm | Measures cap separation |
| Metal | Below 10 ppm | Protects customer equipment |
| Total impurity | Below 100 to 250 ppm | Overall grade indicator |
| Flake size | 12 millimeters | Customer handling and melt consistency |
A small plant does not need a full laboratory, but it needs a few disciplined tests: moisture by weigh and dry, a visual speck count, a float test for cap contamination and a pH check on the final rinse. A basic test bench costs 8,000 to 25,000 US dollars. Recording those results for every shift builds the confidence a customer needs before signing a long term contract.
13. Utilities, Water Reuse and Layout
Official utility figures
The official plant parameter table for a 1000 kilogram per hour line lists 1300 square meters of area, 550 kilowatts of installed power, 2 cubic meters per hour of water with a reuse system, 600 kilograms per hour of steam and 3 cubic meters per minute of compressed air. Larger tiers rise to 6000 kilograms per hour, 3000 square meters and 12 cubic meters of compressed air. These figures are the baseline for a project plan; a compact line built below the official entry tier scales down but keeps the same utility categories.
Water reuse and discharge
Water consumption in the official consumption table is about 1.5 tons per ton of flake, calculated on the basis of a wastewater reuse system. Without reuse the figure would be several times higher, and the discharge permit would be far harder to obtain. A reuse circuit with screening, settling and filtration costs 60,000 to 180,000 US dollars for a compact plant but reduces both water bills and environmental risk. It should be designed with the line, not added later.
Layout and building
The plant needs separate wet and dry zones, a bale storage area, a clean flake packing area and a clear route for maintenance access. Wet stages generate steam and humidity, so ventilation matters for both the equipment and the crew. A concrete floor with drainage and a slight slope under the wash section avoids standing water. Building and civil work for a compact plant typically adds 180,000 to 500,000 US dollars on top of the equipment, a figure that is easy to forget when comparing machine quotes.
14. Process Control and Data Logging
What the control system should do
The official line includes a control system that monitors the production process in real time and watches the operating status of each machine. It also carries an inspection reminder module that prompts regular checks and reduces the chance of a missed maintenance task. For a small business this is valuable because the crew is lean and relies on the system to keep discipline. The controller should log temperature, dose, motor load, line speed and alarms rather than simply showing them on a screen.
Batch records and customer confidence
A customer buying recycled flake increasingly wants a record of where it came from and how it was processed. A simple batch code that links a packed lot to the input bale lot, the hot wash log and the final inspection results is enough to start. It turns a commodity sale into a traceable product and helps when a quality complaint arrives. The data should be exportable so it can be sent to a customer without a special visit.
Remote support
Most suppliers can connect to the controller for remote diagnosis. For a plant far from the supplier this shortens downtime substantially, because a fault that would take a specialist a day to reach can often be resolved in an hour. The contract should state how long remote support is included and what happens after that period. It is a small line item with a large practical value.
15. Output, Yield and Consumption Per Ton
The table uses the official consumption figures for food grade and filament grade production. It shows how per ton energy falls as plant size rises, which is one reason a slightly larger line can be cheaper to operate even if it costs more to buy.
| Input capacity | Electricity per ton | Steam per ton | Detergent per ton | Water per ton |
|---|---|---|---|---|
| 1000 kilograms per hour | 170 kWh | 600 kilograms | 12 kilograms | 1.5 tons |
| 2000 kilograms per hour | 165 kWh | 550 kilograms | 12 kilograms | 1.5 tons |
| 3000 kilograms per hour | 160 kWh | 500 kilograms | 12 kilograms | 1.5 tons |
| 6000 kilograms per hour | 150 kWh | 450 kilograms | 12 kilograms | 1.5 tons |
Yield is the number that decides profitability. A plant running 1000 kilograms per hour of input for sixteen hours a day handles about 16 tons a day. At 85 percent yield that is roughly 13.6 tons of saleable flake. Moving yield to 90 percent adds almost one ton a day without buying a single new machine, which is why front end sorting and operator discipline deserve as much attention as throughput. The official data also notes that bottle composition and plant management level affect actual consumption, so the table should be treated as a design baseline to verify during the trial run.
16. Installation, Training and Commissioning
What installation actually involves
Installation starts before the trucks arrive. Foundations are poured to the equipment drawings, cable trenches and drainage are prepared, and steam, air and water lines are brought to the plant boundary. The machines are then set, leveled and aligned, conveyors are joined, and the control cabinets are wired. A compact line takes two to four weeks of mechanical and electrical work with a local crew supervised by the supplier. Rushing this phase creates alignment problems that show up as belt tracking faults and uneven washing for the life of the plant.
Testing sequence
Commissioning follows a fixed order: no load run of each motor, water batch test of the wash tanks, rotation check of every conveyor, air and steam leak test, then a trial with clean bottles and finally with the customer’s real bale. The trial is the moment of truth. It should be run long enough to reach steady conditions, which usually means several hours rather than a short demonstration. The output is sampled against the quality table and the consumption figures are recorded. A performance guarantee written into the contract should refer to this test, using the customer’s feedstock and an agreed yield.
Training curriculum
Training should cover four groups of skills. Operators learn safe de-baling, feed rate control, label separation, chemical dose, float split, dewatering checks and dryer settings. Maintenance staff learn screen changes, friction washer wear, pump seals, belt tracking and the inspection reminders built into the controller. Quality staff learn moisture, speck count, float test and pH checks, plus how to record a batch. Supervisors learn how to read the consumption data and spot a drift before it becomes a quality complaint. One week of structured training is a reasonable allowance, with a second visit after three months when the crew has real questions.
Documentation and handover
A proper handover includes an as built layout, electrical drawings, a spare parts list with lead times, a maintenance calendar, chemical handling instructions and a written record of the settings found during the trial. These documents are worth more than a brief verbal walkthrough. They let a small team solve routine problems without waiting for a visit, and they form the basis of training for new hires. The buyer should refuse to sign final acceptance until the documents are in hand.
17. Cost Per Ton, Pricing and Payback
Operating cost structure
For a compact plant running near the official entry tier, the main costs per ton of saleable flake are feedstock, energy, chemicals, labor and depreciation. Clean deposit bottles may cost 120 to 260 US dollars per ton delivered, while mixed material can be far cheaper but yields less. Electricity at 170 kilowatt hours per ton and steam at 600 kilograms per ton add perhaps 35 to 70 US dollars depending on local tariffs. Detergent, water treatment and consumables add 12 to 25 US dollars. Labor on two shifts adds 60 to 130 US dollars per ton at moderate utilization, and depreciation on a 1.2 million US dollar plant over eight years adds around 25 to 40 US dollars per ton.
Sale price and margin
Fiber grade flake often sells in a band of 600 to 950 US dollars per ton depending on purity and contract terms, while food grade material commands a higher price but requires tighter quality control and certification. Against a full cost that may sit between 320 and 480 US dollars per ton, the contribution can be 150 to 450 US dollars per ton. At 4000 tons a year, that is a substantial return; at 1200 tons a year the same plant may struggle to cover its fixed costs.
Payback and sensitivity
A 1.2 million US dollar compact plant producing 4000 tons a year at a 200 US dollar contribution per ton returns about 800,000 US dollars a year before tax, giving a payback near 18 months. If yield drops ten points or the market price softens, payback stretches to three years or more. The two variables that most affect the result are a secure feedstock price and a signed off customer contract. A business plan that assumes spot sales for the entire output is far riskier than one with a take or pay agreement for even half the volume.
18. Wanplas Recommendation and Buying Checklist
Recommended configuration
Wanplas offers a food grade PET crushing and washing line whose official process covers the complete sequence from de-baling to packing, with a 1000 kilogram per hour entry tier. The published figures at that tier are 1300 square meters, 550 kilowatts installed, 2 cubic meters per hour of water with reuse, 600 kilograms per hour of steam and 3 cubic meters per minute of compressed air. The line includes a floating washer for caps, dewatering, a zig zag label blower, a smart hot washer with chemical dosing and steam control, a 50 square meter pipe dryer, a 1.5 cubic meter vibrating packing silo and a control system with maintenance reminders. Those are real platform features and they make a sensible starting specification for a small business.
For a business that wants to move beyond flake, the same equipment family includes PET flake pelletizing systems. A compact twin screw unit with a screw near 35 millimeters handles roughly 20 to 100 kilograms per hour, while larger screws reach several hundred kilograms per hour. Adding pelletizing changes the product and the customer base, so it should be a second phase rather than part of the first purchase unless a buyer is already committed.
Before placing the order
- Send representative bales to the supplier and require a trial run with your own material.
- Ask for a written yield and quality guarantee based on that trial, using the official target table as the benchmark.
- Confirm that installation, training, freight and first spare parts are inside the quoted total.
- Require a layout drawing with maintenance clearances and a utility schedule that matches your building.
- Ask for the consumption figures at your intended utilization, not at full nameplate output.
- Agree on the definition of acceptance, including who supplies the bottles and who pays for a failed test.
- Confirm remote support terms and the response time promised after handover.
Wanplas provides installation, training and after sales support as part of a turnkey package, along with a yearly allowance of free spare parts and replacement of damaged parts within the warranty period. For a first time investor, that structure matters as much as the machine list: it means there is one party responsible for turning a building full of equipment into a plant that makes saleable flake.
19. Frequently Asked Questions
How much does a small PET recycling plant cost?
A compact turnkey plant with installation and training typically falls between 865,000 and 2,088,000 US dollars depending on sorting equipment and automation. Building and civil work add a further 180,000 to 500,000 US dollars.
What is the smallest official line size?
The official Wanplas PET crushing and washing table begins at 1000 kilograms per hour of input. Smaller configurations are built from the same station sequence but should be treated as project specific designs rather than published ratings.
What flake quality can the line reach?
The published targets include moisture below 1 percent, label below 15 ppm, PVC below 30 ppm, total impurities below 100 to 250 ppm and a flake size near 12 millimeters. These apply to food grade and filament grade configurations.
How much water does the plant use?
About 1.5 tons per ton of flake when a wastewater reuse system is fitted. The figure assumes reuse; without it consumption and discharge obligations rise sharply.
Why are there two metal removal steps?
The first pass protects the crusher from large ferrous items. The second pass catches smaller pieces exposed after labels are removed, including aluminum detected by eddy current separation.
Can the plant handle colored bottles?
Yes, but the valuable stream is clear flake. Optical sorting removes colored bottles and PVC before crushing, and a second optical pass removes wrong color flake after drying. A feed high in color reduces the price the output can command.
How long does installation and training take?
Mechanical and electrical installation takes roughly two to four weeks for a compact line. Commissioning with trial material takes several days, and one week of structured training is a reasonable allowance with a follow up visit after three months.
When does the plant pay for itself?
A 1.2 million US dollar plant producing 4000 tons a year with a 200 US dollar contribution per ton can pay back in about 18 months. Lower utilization, poor yield or weak flake prices can stretch this to three years or more.
20. Conclusion
A small business PET recycling plant is a nineteen step process wrapped into one turnkey package. The official Wanplas platform begins at 1000 kilograms per hour and defines both the utility load and the quality the line can reach: flake near 12 millimeters, moisture below one percent and impurities counted in parts per million. The value is created by consistent washing, careful sorting and disciplined operation, not by the crusher alone.
The economics depend on secure feedstock and a committed customer more than on the machine price. A compact installed plant costs roughly 865,000 to 2,088,000 US dollars before civil work, consumes about 170 kilowatt hours and 600 kilograms of steam per ton at the entry tier, and can return its capital in eighteen months at strong utilization. Poor yield or spot market sales can double that period.
For a first time investor, the wisest specification is the one that comes with installation, training, written trial results and a named party responsible for the whole line. Wanplas supplies that structure together with the PET crushing and washing equipment, the pelletizing options for a later phase and a yearly spare parts allowance. Before signing, send real bales for a trial, insist on a yield guarantee tied to that trial, and make sure the handover documents are part of the acceptance criteria rather than a promise made after payment.

