A security panel made from polycarbonate looks like a clear sheet, but it behaves like a engineered barrier. The customer sees a transparent window that must stay clear for years, while the buyer must answer harder questions: what impact level it resists, how it fails after a hit, whether it yellows in sunlight, and what one square meter really costs delivered. This guide follows the full production decision for a PC sheet extrusion line used in security glazing, from resin drying and screw design through calendering, lamination, ballistic performance and payback. It keeps the equipment figures tied to a real machine platform and puts every amount in US dollars.
1. What a PC Security Sheet Line Actually Produces
The honest starting point
An extrusion line does not spit out a finished bullet resistant window in one pass. It produces the individual polycarbonate sheets that become the plies of a security laminate. Those sheets are then stacked, bonded under heat and pressure, trimmed and fitted into a frame. Understanding that split matters because the extrusion line and the lamination press are two different investments with two different quality responsibilities. A buyer who expects one machine to do both will be disappointed at commissioning.
The official Wanplas platform for PC sheet is sized for 800 to 1200 millimeters of finished width and 0.175 to 2.5 millimeters of thickness per sheet, driven by a single screw of 130 millimeters with a length to diameter ratio of 38 and designed for 400 to 500 kilograms per hour. Those numbers describe the sheet making step. A security panel that stops a handgun round is typically built from many such plies, so the line is judged on how consistently each ply holds thickness, clarity and low stress, not on how thick a single sheet it can deliver.
Terminology that causes purchase mistakes
Suppliers use three terms loosely, and the difference changes the quotation. A solid panel is one thick extruded sheet, which is difficult above a few millimeters because cooling and sag become hard to control. A monolithic coated panel is a thick sheet with a hard coating on one or both faces to resist scratching. A laminated panel bonds several thinner sheets with an interlayer, and this is the form used for real ballistic glazing.
The same caution applies to the word resistant. No transparent polymer stops every threat at every thickness, and a panel rated for one impact energy can be perforated by a higher one. The specification should name the threat, the distance, the number of strikes and the allowed back face deformation. That is a customer requirement, not a feature the extruder can create on its own.
2. Why Polycarbonate for Security Panels
Impact toughness and ductility
Polycarbonate is chosen for security glazing because it absorbs energy by deforming rather than shattering. The material data on the official site gives a notched Izod impact strength in the range of 600 to 900 joules per meter and a flexural modulus above 2400 megapascals. In practice that combination means a sheet can bend, stretch and craze around a projectile instead of breaking into fragments. Glass scores higher on hardness but fails brittlely, which is why security windows are usually a laminate of both materials rather than glass alone.
Clarity, heat and low temperature
Optical transmission of roughly 90 percent and a refractive index near 1.585 make polycarbonate plausible where a guard needs to see through the barrier. The heat deflection temperature is about 135 degrees Celsius, and the material stays usable down to about minus 45 degrees Celsius. A security booth in a hot climate or a cold border post therefore does not lose shape under ordinary service temperatures.
The weaknesses the line must manage
Polycarbonate is notch sensitive, has poor resistance to many organic chemicals, scratches more easily than glass and yellows under ultraviolet exposure if it is not stabilized. It also hydrolyzes, so it should not be used where it is repeatedly exposed to high pressure steam. Each weakness has a production consequence. Notch sensitivity demands clean edges and careful handling. Scratch risk drives the choice of surface film or hard coat. Ultraviolet yellowing drives the additive package.
3. Panel Construction and How Extruded Sheet Becomes a Barrier
Ply count and total thickness
A laminated security panel is specified by total thickness and ply count, not by the thickness of one extruded sheet. A typical transparent barrier for moderate threats uses several plies in the range of 1 to 3 millimeters each, bonded into a panel of roughly 6 to 20 millimeters. Higher threats require more mass and may switch to opaque steel or ceramic backing, where the polycarbonate acts as a spall liner rather than the whole barrier.
Interlayers and bonding
The interlayer is the weak link that determines whether plies act together or slide apart. Polyvinyl butyral and thermoplastic polyurethane films are common choices, each requiring a different temperature and pressure cycle. Too little heat and the bond is weak; too much and the polycarbonate flows, traps bubbles or loses optical uniformity.
Edge and frame details
Ballistic failures often start at the edge. A tiny notch from a cutter or a sharp corner in the frame concentrates stress and gives a crack a place to start. Edges should be polished or sealed, and the glazing should sit in a gasket that allows slight movement instead of being clamped rigidly.
4. Resin, Additives and Drying Cost
Resin selection and price
Optical grade polycarbonate for glazing is a different purchase from general purpose injection resin. The buyer needs consistent molecular weight, low gel content and a light color, because a single black speck in a security window is a rejected panel. Market pricing for optical grade material can be around 2300 to 3200 US dollars per metric ton, with a premium for ultraviolet stabilized and flame rated grades. At a sheet density near 1.2 grams per cubic centimeter, one square meter of 3 millimeter sheet consumes about 3.6 kilograms of resin, which is roughly 8 to 12 US dollars of material before scrap.
Additive package
A security grade usually carries an ultraviolet absorber, a hindered amine light stabilizer, a release package and sometimes a flame retardant. The ultraviolet system is not optional for outdoor use; without it the sheet yellows and loses transmission within a few seasons. The package adds perhaps 120 to 320 US dollars per metric ton of compound, but it is far cheaper than replacing an installed window. Additives must be metered consistently, because a drift in stabilizer concentration shows up years later as patchy yellowing that cannot be corrected.
Drying before extrusion
Polycarbonate is hygroscopic and must be dried before it meets the screw. Material guidance on the official site puts oven drying at 115 to 120 degrees Celsius for 16 to 20 hours for tray drying, with moisture held below about 0.03 percent. A production line normally uses a dehumidifying hopper dryer with a dew point near minus 30 degrees Celsius and a controlled residence time. Skipping this step causes hydrolysis in the barrel, which lowers molecular weight, creates brittle sheet and can turn clear material hazy.
Dryer capital for a line of this size is typically 25,000 to 70,000 US dollars, and the electrical and maintenance cost adds a few hundred dollars per operating week. The cost is trivial compared with the value of the panels it protects, yet it is the most commonly under specified item in a quotation.
5. Line Architecture and Equipment Price List
A PC security sheet line is a chain of stations that must be balanced. Resin is dried and fed to a single screw extruder, melted through a flat die, drawn over a three roll calender, cooled, edge trimmed, cut to length and then transferred to a separate lamination stage. The table gives a realistic budget for a 1200 millimeter line. Amounts are in US dollars and represent typical ranges, not a formal quotation.
| Item | Scope | Price in US dollars |
|---|---|---|
| Feeding and drying | Dehumidifying dryer, loader, gravimetric feeder | 25,000 to 70,000 |
| Single screw extruder | 130 millimeter screw, 38 to 1 ratio, drive and barrel zones | 220,000 to 420,000 |
| Flat die | 1200 millimeter coat hanger die and die lip | 70,000 to 150,000 |
| Three roll calender | Polished rolls, gap adjustment, temperature units | 180,000 to 360,000 |
| Cooling and haul off | Cooling train, edge trim, pull rolls | 60,000 to 130,000 |
| Cutting and stacking | Cross cut, dust free stacker, protective film | 40,000 to 95,000 |
| Thickness gauging | Non contact gauge and closed loop die control | 55,000 to 140,000 |
| Lamination press | Clean room press and bonding cycle for plies | 200,000 to 520,000 |
| Installation and training | Freight, foundations, commissioning, operator training | 90,000 to 180,000 |
| Total installed line | Sheet line plus lamination and startup | 940,000 to 2,070,000 |
Budgets often omit the clean room around the laminator and the chiller capacity for both stations. Those two items can add 120,000 to 350,000 US dollars. A buyer should also reserve 30,000 to 80,000 US dollars for the first set of dies, film rolls and spare heater bands, because a new line rarely reaches full yield on the first grade it runs.
6. Extruder, Screw and Melt Preparation
Screw geometry for optical sheet
The 130 millimeter screw with a 38 to 1 ratio gives enough residence length to melt optical grade pellets uniformly without excessive shear. A compression ratio near 2.5 to 1 is a sensible starting point for polycarbonate, with a gradual transition and a shallow metering section. Aggressive compression or a high shear mixing section can overheat the melt, create gels and shorten material life.
Zone temperatures and residence
Barrel temperatures typically climb from about 200 degrees Celsius at feed to 260 to 290 degrees at the metering zone, with the die near 280 to 290 degrees. The exact profile depends on the resin grade and the ultraviolet package. A common defect is a cold start against a closed die, which overpressurizes the barrel and can damage the screw.
Residence time should be kept moderate. Polycarbonate that sits hot in the barrel for too long can degrade, and degraded material appears as brown streaks or black specks in an otherwise clear sheet. A line running at 40 percent of capacity with a full barrel is more likely to show specks than the same line at 80 percent.
Filtration and melt handling
A continuous melt filter with screens in the range of 60 to 120 mesh catches carbonized particles and gel fragments. Screen packs must be changed on a schedule, because a blocked screen raises head pressure and can push the melt temperature up by several degrees. Fast screen changers add 30,000 to 80,000 US dollars but avoid a full line stop on a long production run.
7. Die, Three-Roll Calender and Thickness Control
Coat hanger die and lip adjustment
A 1200 millimeter coat hanger die spreads the melt into a wide, uniform curtain. The die lip gap is set roughly near the target sheet thickness, then fine tuned with thermal bolts or a mechanical adjusters. Thermal bolts cost more but respond faster to a thickness profile that drifts at one edge. A die that has been cleaned properly and stored with the lips protected will hold a profile far longer than one that has been scraped with a hard tool.
Roll stack configuration
The melt enters a three roll stack where the first roll sets the surface and the gap between rolls sets thickness. Polished rolls are essential for the optical face of a security sheet; a roll with a fine grind will transfer a haze that no downstream process can remove. Roll temperature usually sits in the range of 90 to 130 degrees Celsius, with the middle roll often slightly cooler to freeze the sheet against the polished surface.
Thickness tolerance and closed loop control
For laminated glazing the target tolerance on each ply is typically plus or minus 0.03 to 0.05 millimeters across the width. A non contact gauge scanning across the sheet feeds corrections back to the die bolts and the haul off speed. Without closed loop control an operator can hold an average thickness but will still produce a sheet that is too thin at one edge, which becomes the weak ply in the finished panel.
Calender bearings are another quiet cost center. Overheated bearings cause roll runout, which appears as a repeating thickness wave in the sheet. A maintenance plan that checks bearing temperature and lubricates on a fixed schedule is cheaper than replacing a damaged roll stack.
8. Surface Film, Coating and Layer Options
Protective film during production
Polycarbonate scratches easily, so a temporary protective film is applied before the sheet is wound or stacked. The film must adhere well enough to stay on through handling but release cleanly at lamination without leaving residue. Film cost is typically 0.15 to 0.45 US dollars per square meter depending on thickness and grade. Skipping it saves a small amount on paper but raises the reject rate sharply once sheets are stacked and moved.
Hard coat and ultraviolet layer
Outdoor security glazing benefits from a hard coat that improves scratch resistance and a cap layer carrying the ultraviolet stabilizer. The official Wanplas platform includes an ASA film composite line, with film thickness in the range of 0.05 to 0.2 millimeters, which shows how a surface layer can be added in the same extrusion process. For polycarbonate security sheet, a co extruded cap layer is attractive because the expensive stabilizer is concentrated where it is needed, near the exposed face, instead of being diluted through the whole ply.
A hard coating can add 2 to 6 US dollars per square meter of finished panel and may double the surface durability. The decision should follow the installation: an indoor bank counter may not need it, while a window cleaned weekly with a cloth certainly does.
9. Cooling, Haul Off and Cutting
Cooling train design
After the calender the sheet passes through a cooling train where it loses heat evenly from both faces. Uneven cooling curls the sheet and locks in orientation, so the air or water temperature should be consistent across the width. A long enough train matters more than aggressive cooling; forcing the temperature down too fast creates stress that later causes the panel to bow when it is reheated for lamination.
Haul off tension
Pull rolls must grip the sheet without marking the polished surface. Tension is kept low and constant, because a pull that varies by even a small amount shows up as a thickness band. Servo driven haul offs are worth the extra 20,000 to 45,000 US dollars on optical work, since they hold speed during die adjustments and reel changes.
Cross cut and stacking
The cross cut must be clean and square. A dull blade leaves micro notches along the edge, which are exactly the stress concentrators that reduce ballistic performance. Dust free stacking with protective interleaf keeps the surface clean before lamination. The cutter and stacker together are a 40,000 to 95,000 US dollar item, and the buyer should ask for a sample cut edge to be inspected under magnification during acceptance testing.
10. Process Window and Control
The table gives a working window for a 130 millimeter line producing optical polycarbonate sheet in the 0.5 to 2.5 millimeter range. Values are starting points for trials, not fixed settings. The last column explains what goes wrong when the variable drifts.
| Variable | Typical window | Effect of drift |
|---|---|---|
| Resin moisture | Below 0.03 percent | Hydrolysis, lower strength, haze |
| Drying temperature | 115 to 120 degrees Celsius | Under dry sheet, over dry discoloration |
| Feed zone | 200 to 230 degrees Celsius | Bridging or premature melting |
| Metering zone | 260 to 290 degrees Celsius | Degradation specks or unmelt |
| Die temperature | 280 to 290 degrees Celsius | Die lines, uneven gloss |
| Melt filter | 60 to 120 mesh | Gels, black specks, head pressure |
| Calender rolls | 90 to 130 degrees Celsius | Sticking, sag, frozen stress |
| Ply thickness | 0.5 to 2.5 millimeters | Weak ply, bond variation |
| Thickness tolerance | Plus or minus 0.03 to 0.05 millimeters | Optical bands, weak spots |
| Line speed | Set by gauge and cooling | Sag, curl, thickness drift |
Operators should record melt temperature, head pressure, roll temperature and thickness profile for every roll of sheet. When a ballistic test fails months later, that record is the only way to find out whether the problem came from the extrusion stage or the bonding stage.
11. Optical Clarity and Surface Defects
Common defects and their causes
Die lines appear as long stripes in transmitted light and usually come from a dirty lip or a damaged die surface. Black specks point to degraded material or a filter that has been in service too long. Haze can come from moisture, from a roll surface that is too cold or from a resin that has been overheated. Bubbles suggest trapped air at the die or moisture in the pellet.
Inspection methods
Sheet should be inspected in transmitted light on a light table, with a dark background for specks and a bright diffuse field for flow lines. A transmitted light scanning system can be added for 60,000 to 160,000 US dollars and will catch defects that an operator misses on a long shift. Birefringence is checked with crossed polarizers, because frozen stress may not be visible in ordinary light but will cause a panel to distort when it is heated for lamination.
Acceptance criteria
The customer and the producer should agree on defect counts before production starts. A practical rule is to count allowed specks per square meter by size band, and to define a maximum number of die lines longer than a set length. Without a written rule, a rejected roll becomes an argument. With a rule, the operator knows when to stop the line and change a filter, and the buyer knows what will be delivered.
12. Lamination and Panel Assembly
Preparing the plies
Each extruded ply is cut to size, cleaned and conditioned before it enters the press. The protective film is removed, the surfaces are checked for dust and the plies are stacked in the correct orientation. A sheet stored in a humid plant can pick up enough moisture to form bubbles during the hot press cycle, so the lamination area should be climate controlled.
Press cycle
The plies and interlayer film are heated under pressure in a cycle that depends on the interlayer chemistry. Pressure must be even across the panel, and the temperature must be high enough to activate bonding without deforming the polycarbonate. Cooling under pressure is as important as heating, because a panel removed too hot will warp. A press with 1200 by 2400 millimeter platens and full controls sits in the 200,000 to 520,000 US dollar band.
Trimming and finishing
After bonding, the panel is trimmed, edges are polished and holes are machined if the frame requires them. Every machining step must avoid notches, because polycarbonate is notch sensitive. A chamfered and polished edge survives impact far better than a square cut edge. Finishing labor for a medium sized panel is perhaps 6 to 14 US dollars per square meter, a figure that is easy to overlook when comparing a sheet price with a finished window price.
13. Ballistic Performance and Failure Modes
How a laminate stops a projectile
The plies absorb energy through stretching, delamination and local heating. A well bonded panel spreads the load over a wide area, while a weakly bonded one lets a projectile punch through ply after ply with little resistance. That is why bond quality, which looks like a cosmetic issue, is in fact a safety issue. A panel can have perfect optical clarity and still fail if the interlayer cycle was wrong.
Back face deformation
Even when a panel is not perforated, the back face can deform enough to injure a person behind it. This is the reason a higher threat rating usually means more total thickness rather than a harder surface. A designer who only looks at whether the projectile passed through will miss the more common injury mechanism. Clearance between the panel and the person behind it should be part of the installation drawing.
Aging and environmental effects
- Ultraviolet exposure without a stabilizer yellows the sheet and reduces transmission, which is both a cosmetic and a visibility problem.
- Temperature cycling can weaken the interlayer bond if the coefficients of expansion are poorly matched.
- Chemical cleaning agents can attack polycarbonate and cause stress cracking, so cleaning instructions must be supplied with the panel.
- Repeated small impacts can create a network of micro cracks that lowers the strength of a panel long before any single hit appears serious.
A supplier should offer a periodic inspection guide with the product, because security glazing is a safety component with a service life, not a permanent fixture.
14. Quality Control and Testing
In process checks
Thickness, optical appearance and weight per square meter are checked on every roll. Melt temperature and head pressure are logged continuously. A simple tensile coupon taken once per shift confirms that the resin has not lost molecular weight in the barrel. These checks are cheap and they catch a drift before it turns into a rejected laminate.
Finished panel tests
Finished panels are checked for light transmission, haze, bond strength and edge quality. Impact testing is destructive, so it is done on sample panels from a batch rather than on every unit. A test rig and small environmental chamber represent a capital cost of 40,000 to 120,000 US dollars, but a producer who ships security glazing without any in house impact capability is accepting a large warranty risk.
Traceability
Every panel should carry a batch code that links it to the resin lot, the sheet rolls, the press cycle and the operator. When a customer reports a failure, traceability turns a guess into a focused investigation. It also protects the producer when the fault lies in the frame or in the installation rather than in the panel itself.
15. Output, Changeover and Scrap
Realistic production rate
The designed capacity of the official PC sheet platform is 400 to 500 kilograms per hour. At 1.2 grams per cubic centimeter, a 1200 millimeter wide sheet that is 1 millimeter thick weighs about 1.44 kilograms per meter, so a line running at 350 kilograms per hour produces roughly 240 square meters per hour. A laminated panel needs several plies, so finished panel area is a fraction of that figure. A buyer should calculate output in square meters of finished panel, not in kilograms of molten polymer.
Changeover practice
Changing thickness or color takes 30 to 90 minutes on a well run line and much longer if the die has to be removed and cleaned. Production scheduling should group the same grade and color together, with optical grade runs before any darker material. Every purge between grades costs resin and creates scrap, so a realistic plan allows for two to four changeovers per week rather than one per order.
Scrap accounting
Scrap on optical sheet comes from startup, edge trim, filter changes, thickness drift and lamination rejects. A mature line might run 6 to 12 percent scrap; a new line with an untrained crew can exceed 20 percent for the first months. The cost of that difference at 10 US dollars per square meter of resin and processing is significant, and it should be modeled explicitly in the payback calculation rather than hidden in an efficiency assumption.
16. Utilities, Floor Space and Staffing
Power and water
A complete sheet line with dryer, extruder, calender, cooling and chiller typically draws 220 to 380 kilowatts connected, with an average consumption nearer 130 to 240 kilowatts in steady production. The lamination press adds a peak load that should be managed separately so that both stations do not start at the same instant. Cooling water at 15 to 25 degrees Celsius with adequate flow is needed for the calender and the hydraulic press.
Floor space and handling
The extrusion line needs roughly 30 to 45 meters of length and 8 to 12 meters of width including operator access. The lamination press and clean room need a further 120 to 250 square meters. Sheet and finished panels are heavy and awkward, so an overhead crane or a vacuum lifting device is worth 15,000 to 45,000 US dollars. A plant designed without handling equipment will lose time and damage panels at every transfer.
Staffing and training
A shift normally needs an extruder operator, a calender operator, a lamination technician and an inspector, with a supervisor covering two shifts. Training should cover drying, die adjustment, optical inspection and the press cycle, not just button operation. A supplier that provides structured training and a year of remote support adds value well beyond the machine price.
17. Cost per Square Meter, Pricing and Payback
The table below models a laminated panel of about 6 millimeters total thickness built from four plies, running on a 1200 millimeter line at a moderate utilization. Figures are in US dollars per square meter of finished panel.
| Cost line | Low utilization | Good utilization |
|---|---|---|
| Polycarbonate resin | 11.80 | 10.40 |
| Ultraviolet and additive package | 0.90 | 0.80 |
| Interlayer film | 2.60 | 2.40 |
| Energy and water | 1.90 | 1.30 |
| Labor and inspection | 3.40 | 2.10 |
| Scrap and rework | 3.20 | 1.30 |
| Depreciation and overhead | 7.50 | 3.90 |
| Full cost | 31.30 | 22.20 |
| Typical selling price | 38.00 to 52.00 | 32.00 to 46.00 |
At a selling price near 40 US dollars per square meter and a full cost near 22 US dollars, the contribution is about 18 US dollars per square meter. On 140,000 square meters per year that is roughly 2.5 million US dollars, which recovers a 1.4 million US dollar investment in well under two years before tax. At low utilization the contribution narrows and payback can stretch to four years or more, which is why the order book matters more than the machine price.
A producer should not compete on sheet price alone. Security glazing is bought on certified performance, delivery time and a written warranty. A panel that costs 3 US dollars more per square meter but arrives with traceable test records will win most institutional contracts.
18. Wanplas Equipment Recommendation
Where Wanplas fits
Wanplas supplies sheet extrusion platforms that match this application, including the PC sheet and ASA film composite production line. The relevant configuration for security glazing is the PC sheet station with a 130 millimeter screw, a 38 to 1 length ratio, a finished width of 800 to 1200 millimeters, a sheet thickness of 0.175 to 2.5 millimeters per ply and a designed capacity of 400 to 500 kilograms per hour. The same family includes co extrusion options for a surface film, which is useful when an ultraviolet rich cap layer is part of the design.
For the full project, Wanplas can also provide the upstream drying and feeding equipment, melt filtration, calender, haul off, cutting and stacking, plus recycling equipment that returns edge trim and rejected sheet to the process. Keeping the sheet line and the recycling loop under one supplier simplifies the specification and makes the scrap figures in the cost model easier to defend.
What to ask for in a proposal
- A signed output baseline in square meters of finished sheet at the target thickness and width, not only kilograms per hour.
- A thickness profile measured across the full width, with the tolerance stated for each ply.
- A die and calender surface finish specification for optical grade sheet.
- A clear statement of which parts belong to the sheet line and which belong to the separate lamination stage.
- A priced list of spare heater bands, screen packs, roll bearings and protective film for the first year.
- A trial run with the customer’s own resin and additive package before final acceptance.
Because a security panel is a safety product, the buyer should also ask for a written description of the supplier’s responsibility. Wanplas can commit to the sheet making equipment and its performance; the ballistic rating of the finished panel depends on the ply design, the interlayer, the press cycle and the installation. Separating those responsibilities at the contract stage avoids a dispute later.
19. Frequently Asked Questions
Can one line make a finished bullet resistant panel?
No. The extrusion line makes the individual polycarbonate plies. A separate lamination press bonds those plies with an interlayer into a finished panel. The two investments should be quoted and accepted separately.
What sheet widths and thicknesses does the official platform cover?
The PC sheet station covers 800 to 1200 millimeters of width and 0.175 to 2.5 millimeters of thickness per sheet, with a designed capacity of 400 to 500 kilograms per hour. Security panels are built by laminating several such sheets.
Why is drying so important for polycarbonate?
Polycarbonate absorbs moisture, and moisture in the barrel causes hydrolysis that lowers molecular weight and strength. The official material guidance puts drying at 115 to 120 degrees Celsius with moisture below about 0.03 percent before processing.
Is polycarbonate better than glass for security glazing?
Polycarbonate absorbs impact by deforming rather than shattering, so it is far less likely to produce dangerous fragments. Glass is harder and more scratch resistant, which is why the two materials are often combined in a laminate.
What causes yellowing and how is it prevented?
Ultraviolet exposure without a stabilizer turns polycarbonate yellow. An ultraviolet absorber and light stabilizer in the compound, or a concentrated cap layer on the exposed face, prevent it. The additive cost is small compared with replacing an installed window.
How many plies are used in a typical panel?
A moderate transparent barrier often uses several plies of 1 to 3 millimeters each, forming a panel of roughly 6 to 20 millimeters. The exact construction depends on the threat level and must be validated by testing, not assumed from a table.
What is the largest operating cost besides resin?
Energy and labor are the two largest, followed by scrap on optical grade work. At moderate utilization the full cost of a laminated panel is roughly 22 to 31 US dollars per square meter, with resin the single biggest line item.
Can edge trim and rejected sheet be recycled?
Yes. Clean polycarbonate edge trim can be reground and reprocessed, although optical grade sheet usually limits the recycle ratio to protect clarity. A recycling loop from the same supplier keeps the material flow and the cost model consistent.
20. Conclusion
A PC security sheet line is a precision optical process, not a simple sheet extruder with a bigger motor. The official platform provides the right building block: 800 to 1200 millimeters of width, 0.175 to 2.5 millimeters per ply, a 130 millimeter screw with a 38 to 1 ratio and 400 to 500 kilograms per hour of designed output. The finished ballistic panel is then created by bonding those plies under controlled conditions, and its performance depends as much on drying, melt filtration, calender surface and edge quality as on total thickness.
The economics work when the line runs steadily on optical grade material. Resin, interlayer film and scrap dominate the cost per square meter, while depreciation matters mainly at low utilization. A realistic budget for the complete sheet and lamination installation is roughly 940,000 to 2,070,000 US dollars, with a full panel cost near 22 US dollars per square meter at good utilization and a payback between two and four years depending on volume.
Wanplas can supply the PC sheet extrusion platform, the drying and filtration upstream equipment, the calender and downstream handling, and the recycling loop for trim. When requesting a proposal, state the target panel construction, the number of plies, the width, the annual square meterage and the tests the finished panel must pass. Ask for a signed output baseline, a thickness profile across the full width, a trial with your own resin and a priced spare parts schedule.

